Mr. Wonky

My great friend Liz from Ontario made me this super sweet bead.
I hung it from my rearview mirror, so I can watch it fly while I am driving.
He has a ton of personality. His face is lopsided and he hangs funny.
I love him!





Liz also sent me these beads that she made. I love them all!

These are my two favorites.

Crystal Cuff Bracelet

This is not finished, as it needs a clasp.
I am making this for a friend of Julie's who might like to purchase 4 of these for her bridesmaids.
I am not sure what kind of clasp I will use, whether I will make one, or use one that I purchased.

I am hoping to make another crazy bracelet like this by crocheting it. I think it will take a lot less time, and I can charge less.
This bracelet took me approximately 5 hours total already, I had to make it up as I went along, trying to copy a bracelet that Julie had, but making it more delicate.

The materials are sterling silver wire in 22ga for the structure and 24ga for the wraps, the beads are swarovski crystals in clear and AB, clear and silver lined #15 seed beads, and some silver lined triange beads.

Crocheted Carnelian and Garnet Necklace

I started this necklace on my vacation, although all I got done was stringing the beads until I had a 2 1/2 hour layover in Ohio...that prompted me to actually make it. Crocheted sterling silver wire with carnelian and garnet beads.
I love this type of necklace, I have made many of these in various gemstones.
This one is particularly delicate, it can be wrapped around a smallish wrist three times for a nice bracelet, too.

Pearl Bracelet

The bracelet on...

The total mess I made making it.

Embellished Matchbox

This coffin is made from a rectangular matchbox.
I covered it with black textured matboard paper (stripped off of a mat scrap). The flowers are also stripped matboard coiled into flowers, and cut out leaves.
The handles of the coffin are made from aluminum wire.

I found the head from a small toy, and x'ed out the eyes, for a comic effect.

I made this for a challenge on the forum, it is not due until May 15th, but I just couldn't resist posting it here.

Stacking Rings

I made these simple stacking rings for Julie.
She saw one I made for myself and wanted 5 of them. I only had enough of the correct size stock to make 4 so that is what she is getting.


These were pretty easy to make, but if I had the proper soldering set up they would have been a lot easier. I really need to get a hose and needle tip for my propane torch. The butane torch really doesn't get hot enough for a good solder.

I also tested the size by trying on a ring of hers and comparing fingers. That isn't the preferred way of sizing, so I hope they fit.

Here they are in action on my old wrinkly finger.

Weathered Metal Technique

I used nashua foil tape. Cut pieces of tape crumbled up, then straightened out and taped in place. The first picture I used a waterbased extending medium with acrylic paints. The second picture I used Matte varnish to extend the acrylic paint. The second one has only one layer of paint so far.

The Self Image

I have been in an altered book swap with some friends of mine, but the going has been slow, so I decided to start my own book. It's hard to get any instant satisfaction when your book is traveling across the country in a zig zag.

This book is one that I started myself for no reason other than boredom and the need to alter a book.

I found this great self help book at the antique store, it was only one dollar and the chapter titles are worth three times that price. I tried to use the book's own words to tell a story. These are the first spreads in the book, but is is far from done.

Flower Necklace

Today was the last class, I am sad.
I made some more of the hammered soldered rings to finish my necklace, and then attached the whole thing together with oval jumprings. I made a simple toggle for the clasp.




I found out today that we have access to the workshop for the entire day next saturday. I am very pleased about that.

I bought some gorgeous labradorite beads today with my christmas gift certificate. I can't believe it took me so long to use it.

Bezel set ring

I am late in posting this week.
On Saturday, we had bezel setting demos.
I decided I had to try it while the information was fresh in my thoughts. So, instead of finishing the flower necklace, I made this ring. I will finish the necklace this week.
This stone is an intersting combination of turquoise and I think green aventurine and amethyst. Feel free to correct me, as my guess is uneducated, I made this determination purely from the colors and texture of the stone.
I really want to join my local rock hound club...if there is such a thing.

I cut the shank out of 18ga silver sheet and sweat soldered it to my bezel which I made from 1/8in bezel wire and 24ga sheet for the bottom.
My last soldering, which was easy solder, seemed to make the solder joint on the bezel recede (I knew this could happen, but this was my first experience with it). I used hard solder on the bezel wire and medium solder to attach it to the base, then easy solder to attach the shank to the box bezel.

I worked on this ring for 4 1/2 hours and the stone is still loose. I really wanted to get it secure, but I was running out of time, and I don't have a bezel pusher at home. Maybe I can find something around the house that will do the trick.
I wore this ring all saturday night and all day sunday, and the stone is still in, just loose.

Tube setting finally

Before I started to drill and set my stones into the flowers, I made a practice pendant. I worked so long already on the flowers that screwing them up in this final process would have been devastating to me.
This is a topaz of some sort, 6mm stone and one of the rings I had previously made. I soldered the tube setting to a back piece, and sawed and filed for a smooth finish. I soldered the filed tube setting to the inside of the ring. Then I sucessfully set the stone! YAY!

I really like this little pendant, I think I will just string it on a chain right through the ring.

I drilled out the middle of the flower with a burr bit, which proved to be quite a challenge. The soldered wire behaves nothing like sheet, that's for sure. Then I filed inside the hole until the tube fit into it snuggly on all joints. I soldered the tubes in place, and then off I was to the drill press.

Burring out the center of the tube is very picky, too. I started with smaller burr bits than I needed and worked my way to a larger size three times. It is easy to overdo it.

You can see in the close up that I could have done a neater job, but it was harder than I thought.

Next week we will do bezel setting.

My page in Cammy's book

Cammy was the first to work on my book, and now I finally worked on hers.
I did a spread in Cammy's book.
I hope she likes it.
It doesn't make much sense, but it was really fun to do.

My page in Leah's book

It has been a very long time since I received a book to work on. Last friday I got two in the mail.
This is Leah's book.
I call this 'Leah and her Ladybugs'.

Flower necklace progress

Today we got tube and flush setting demontrations.
I made two more flowers both a bit smaller than the center flower. I also cut the tube for the cubic zirconias. Red in the center and clear on the sides. I will have to wait until next saturday to set them, as I still have to drill out the inside for the stone to sit. I also still have to file out a base in the center of the flowers and solder the tubes in place.
The flowers have been hammered flatter at the bend, still round at the center.
I don't know how far up the sides I will take the rings, I may just use 4 like the picture and use leather cord or a smaller chain for the rest.
I don't know...tune in next week and find out.

Here is a different angle (to view the tubes) and different set up. I had taken this picture at school.

Flowers flowers everywhere

I really missed class last saturday. It seemed like an eternity between classes.

Back on track now.

Today I oxidized my petal ring with LOS and then polished it on the wheel. I couldn't get a great picture of it, the light was messing with the shininess.

I think I see myself in there...Heehee

Then I got to my next project, soldering. I cut these petals out of 14 gauge silver wire and then filed them so that they would have a nice fit. This took a long time. The soldering I did all at once. I made sure that the pieces were butting up against each other neatly, and then fluxed the whole piece and layed tiny pallions of solder on each of the five joints and heated until the flow. Very exciting!

This is a sneak peek of what I plan to do with this very 60's style pendant. I will make another of the curly bail thingy for the other side of the pendant, and solder those on. I plan to tube set the ruby in the center of the flower. I will either set it on top of the center, or carefully file out the exact fit of the tube in order to sink the setting a bit.

I stayed after class and made these five soldered rings, they are 18 gauge and hammered. Totally groovy links! I don't know what to do with only five of them, so I'll have to make more so I can have a chain. These are a bit smaller in diameter than a dime. I used a sharpie to coil the wire around and cut the rings with a saw.

Semi Truck + Power lines = chaos

I had a most surreal experience on my ride to work today.
I was driving the route I always take, a short boring ride through the neighborhoods of Norwood. As I approached the stop sign next to the post office, I noticed a semi truck one car ahead, slowly driving into the opposite lane to take a huge swing of a right hand turn. I had never seen a Semi on this road, nor do I think I should have. I came to a stop behind the car waiting for the semi to turn.

The semi took the right turn along with the cables that power half of downtown Norwood.

This next part is extremely hard to explain, it was in slow motion, right out of a movie. The power lines that clung to the front of the top of the semi truck began to bungee wildly back and forth, up and down, and a few of them began to snap and spark. My eyes were everywhere, watching the lines all around me, slowly coming towards me and then reversing direction and soaring till they were well beyond where they originated. They went back and forth until the driver ahead of me gunned his car to avoid the lash, and I followed.

I gassed the car so fast, and blew the stop sign, taking a left to avoid the pole just ahead that was swaying back and forth menacingly. I guess I thought getting in a car accident would be less troubling to me than getting lashed with live wires. Thankfully neither happened.

I arrived at work very shaky but safe, and had to calm down a bit before my hands were steady.

Petal Ring

I completed my petal ring this morning.
I should have waited for some guidance, since I started to rivet the whole thing together before I spoke to the instructor about it, and now the petals are immobile.
You live and learn. I did get some tips on how to achieve this, but too late for this ring.
I still like the ring a lot, so no harm done.




After I completed the ring, we had demonstrations on a bunch of ways to solder. The demos took almost the entire class. The last 1/2 hour of class, I practiced soldering with some scrap copper. I sweat soldered some sheet scraps to a square piece of copper, and then soldered some wire onto the square as well. It wasn't any kind of design that I am proud of... it was just for practice, so I didn't take pics.

We will start on Project 3 in two weeks since next Saturday is spring break. I have two weeks to come up with a design that incorporates soldering sheet and wire, with any processes we have learned up to this point. I better put on my thinking cap.

Picture Frame pendant

I have had a busy weekend, I couldn't post yesterday's work until now.

I finished the picture frame pendant. I cut out a tiny picture, and recycled a piece of plastic packaging to use as the 'glass'.

The whole copper, paper, and plastic sandwich is riveted in the center on either side, and one rivet in the center on the bottom.

Since my regular instructor was back, I got back to my ring after finishing the pendant.

I soldered on the post for the rivet, I still need to polish the ring to a high shine before adding the petals and riveting it all together.

I am going to finish the polishing at home this week and complete the ring next saturday.

Project 2: take two

I really wanted to work on the ring today, unfortunately we had a substitute teacher who really didn't see my vision. As I showed her the project I was working on, she continuously made comments on how I should have done this or that first, and that this or that wouldn't work. I don't mean to say she was negative, but she clearly couldn't grasp the design. So instead of confusing myself and the substitute, I decided to start on something else and save the ring for my instructor who can envision the finished ring as I do.

I encouraged the sub to go through my sketches, and we chose this picture frame pendant. I initially wanted to make this pendant with tubes and rivets so as to have a space in between to change out a small photo. This version, however, will be a picture permanent in the frame, sandwiched between two pieces of copper, with a piece of thin plastic over the top of the picture.

I plan to search for a picture to include in this frame tomorrow. I am thinking of an impressionistic floral painting or something like that.


The side view... since this project needed to be formed and textured, I formed the sides slightly outward and the corners more so. The rivets will come into play once I find an appropriate image to incorporate. As it stands right now, I plan to rivet only the center of the two sides and the bottom. I initially wanted to rivet through the bail as well, but I formed the tip into a leaf and I realize that a rivet will just destroy the look of it.

So, this is what I did today in class. Next week I hope to finish this pendant and my ring that can't be done....yeah, we'll see.

Project 2: work in progress

I decided on a design for a ring with free moving petals riveted to the shank. The blank for the shank was sawed out of 18 gauge silver sheet. The petals were sawed out of 20 gauge, drilled and formed slightly, and the wire that will connect the two is 14 gauge. The petals will each be textured differently.

I made seven petals, although I may just use five since height may become an issue. The texturing will thin them slightly, so I will just have to see how it goes.

The shank is soldered closed and the wire will be soldered to the shank before the final riveting.

So this is as far as I got today. I like the idea of taking pictures in different stages of the process, I wish I had done this with the ufo and the P.
I hope to sand the seam to invisible, and finish the shank to a high shine, as well as one petal, and the rivet. The rest of the petals will all have a feel and look all their own.

Project 2: surfaces, cold connections, basic forming

Class today was just jampacked with a ton of information, and demonstrations.

Topics covered were:
Annealing sheet and wire, quenching and pickling, and the differences between base metals (bronze, copper, and brass), and gold and silver.
Texturing, using all manner of steel hammers and stamps. A very large catagory.
Forming, using dapping blocks, wood, steel mandrels, anvils...the list goes on.
Riveting with wire and tube.
Tube cutting.

I was originally faced with the fact that I was going to have to miss this class. When I enrolled, I knew that Julie would be gone this weekend, and I would have to watch the shop, but being the doll that she is, she would hear nothing of it. She volunteered mom to open up for the art classes, and await my arrival, telling customers that I would be along at about 1pm. This was the first class that I didn't stay in the workshop hours after class was over.

Class went over schedule today, we were let loose at just after 12:30 as opposed to the usual 12:15.
I wanted to skip out early, because my mom was watching the shop, but I couldn't bring myself to. It turned out that this was a crucial class that could not be missed. I ran to my car when I got out, and sped all the way to work. Thankfully for mom and I, today was not so busy as saturday's usually are...not thankfully for the shop, tho. Things seemed to be fine when I arrived at work, everything was okay.

So I am left to ponder my next assignment: Project 2.
I must have a detailed sketch by next saturday, and this project will take us the next three weeks to complete.

Here is the overview of what is expected, taken from my instructor Sandra's directions.

"Project 2: surfaces, cold connections, basic forming
This project will require the sheet metal of your choice, wire, appropriate saw blades and finishing materials, and layout materials.
Give the metal some dimension by forming over a mandrel or stake, or by dapping. Texture the metal by either hammering or stamping. The surface treatment should be considered an integral aspect of the overall design. In addition, projects must utilize rivets or other wire connections as decorative or structural elements.
There is a historical design convention of using repeating elements. As a starting point for this assignment, I suggest using the idea of pairs or multiples: in other words, motifs or elements that have some visual or conceptual relationship to each other. They could be abstract or representational. The overall format could be similar forms repeated with slight variations, or pairs, or the same element repeated several times.
Project due: March 10th"

So, I will be sketching some designs this week until I come up with something appropriate that I can actually execute.
My original thought was to somehow make a human form using rivets as the joints, but as I thought further on this subject, I think it may be too complex for my beginning class. I will attack this at some point, but for right now, I will just have to take some inspiration from the things around me to gather ideas. I am keeping my eyes wide open.

First assignment, piercing...two dimensional design

I am really loving my metals class. Our first project was to make a two dimensional piercing in the metal of our choice. This assignment started last Saturday (1/27), and concluded this Saturday (2/03). I chose a simple framed ufo design. I used 18 gauge sterling silver sheet. I plan on soldering a bail to the back, I didn't want to just cut a hole for a jumpring. The polish is high, 1200grit, you probably can't see that from the photo, but I spent a lot of time on the finishing of this piece, and it will most likely be a gift once it is completed. I am really not a ufo type person, but I liked the design and it was simple. I got some great practice with the saw and drill press on this one. This piece is 1 inch square of silver sheet.



Since I made such a simple first design, I had time to make another. This is a copper dog tag for my favorite pet, Perry...we call him P. Another very simple design, but this one was made especially for P with love. I had planned to saw out the circle, but discovered that I had access to some cool hand tools like the circle punches. This tag was punched out before piercing. A 1" circle punch on 18 gauge copper sheet...brute force was key in the execution! It took quite a few precice blows with the hammer to finally get the hole punched out, and some more brute force to get the 1" punch out of the steel holder.
I think Perry will really like it, in fact, I almost wish I didn't waste so much time in the finishing, because I know after an hour of putting it on his collar it will look nothing like this. I have to wait until next week to give it to him, because he will surely destroy it, and since it is part of my assignment, I want it to be prestine for the instructor to judge next week...then P can have his way with it. This piece is a 1 inch circle of copper. I struggled with the lopsided P, but as I worked it, I grew fond of the cartoonish lettering.



I initially cut a square out of my copper sheet to saw the circle for Perry's tag out of, this was before I knew I could punch it out. Needless to say, I had a lot of waste. I decided to do something with the wasted copper. A circle in a square that was not centered. I decided to cut points as in sunrays into the scrap. I think this may end up being layered somehow into some other design with another metal underneath...I really don't know what to do with this, but I am sure it will end up being something or other. It is shown with the piece that was punched out. This piece is approximately 1 1/2 inches square...although its not square anymore.

My Page in Holly's Book

I actually completed this page spread the last week of December 2006. A page for the new year. Holly is a party girl, and she knows the delight of a Harpoon, so I thought the focus of this spread was appropriate for the season.

First Metal Class

We got an overview of the class today. A lot of talk on safety and tools and rules and blah blah blah. The instructor is great. Her name is Sandra Bonazoli and she makes really cute kitchen utensils out of pewter. I already knew a lot of what she taught us today, but it was nice to hear the details, and I learned new techniques which is always a good thing.

After all the orientation, we had demonstrations of some of the tools we would be starting out with. The tools that are available for students to use are amazing. The first demo was for the metal sheet cutter, a mammoth machine that is all gravity powered. It cuts large sheets of metal into more manageable pieces, sheets as large as 4 feet by 8 feet. A long foot lever at the bottom to use your body weight to slice the metal. Very impressive.
A short demo of the drill press and I am not talking about a dinky dremel either...this press was an entity all its own, with a steel base floor to top.
Then we had instruction on how to properly cut with a jewellers saw.

After all the demos, we were each given a piece of brass sheet to practice sawing with.

We cut our simple designs out of brass sheet. Very beginner, but I did well with the saw, and I cut out a design of a simple 5 petal flower. I was pleased with the ease of the saw after hearing detailed instruction. I have been hand sawing my own rings, but have been apprehensive to try to saw sheet...I don't know why. I have some 18 ga silver sheet I have been looking at for months. I suspect by next Saturday I will have cut into it.

Next Saturday I will get my student ID, and will have discounted parking and discounts at the Art supply stores but more importantly, I will have access to the studio 4 days a week (limited hours). This access includes the two other Metal jewelry classes (without instruction) on Tuesday nights and Thursday nights, a couple of hours on Monday nights, and all day Saturday after my class is over.

I have already sketched out a design for the next class, but I suspect I will have at least a dozen by the time Saturday rolls around again.

Metals Course at the SMFA

I have been so excited to take my first metal jewelry course, and it starts tomorrow! I hope I can sleep tonight.

I am taking a metalsmithing course at the School of the Museum of Fine Arts in Boston. I think I have gotten as far as I am going to get without any human instruction. The course runs a full semester (1/20 - 4/28) every Saturday morning from 9am - 12:15pm.

Here is the course description taken from the smfa website:

Metals-brass, copper, bronze, and silver-can be shaped, molded, cast, cut, and altered to produce sculptural objects, jewelry, or decorative pieces. Through demonstrations and hands-on projects, this course will explore the fundamental skills and techniques in jewelry making. You will learn processes such as sawing, piercing, riveting, texturing, silver soldering, bezel setting, and simple casting. Projects will allow you to make pieces of your own design. This course is essential for beginning jewelry artists, sculptors in metal, or anyone interested in working with metals.


So, not only have I enrolled in a fantastic metals class, but I have left my Friday night social life to the cobwebs.

I will have one other day a week to work in the School studio with no instruction, either Tuesday nights or Thursday nights. I am really excited to learn how to manipulate silver into beautiful works of wearable art. I am psyched to take my jewelry making to the next level.